Products Detail
ZBL-P8000 Wireless Dynamic Testing Equipment for Pile has wide dynamic range, low noise amplifier system, 24 bit A / D sampling;signal has good stability, so the defect and pile bottom can be identified easily.
Wireless connectivity between accelerometer and PDA allows easy and more flexible usage on site. PDA can be utilized upto 10 meters away from the accelerometer.
Real time on-site processing such as smoothing, differential, filtering,exponent and linear amplification can be given to tested wave form.
New wavelet processing
The signal noise can be eliminated by taking average superposition of multiple signals. Superposition signals can be checked at any time,poor-quality signals can be rejected.
Project/pile testing data can be easily saved, accessed, edited, or deleted.
Gain value can be adjusted according to length of pile, condition of pile top surface.
|
Parameter |
Specification |
|
Amplifier frequency band |
1~10k (Hz) |
|
A/D resolution |
24 bit A/D |
|
Sampling time intervals |
6.4μs~1638.4μs |
|
Maximum length of sampling |
≥2048 |
|
Amplitude nonlinear degree |
≤10% |
|
Dynamic range |
≥180 (dB) |
|
Error of time indication |
≤1% |
|
Gain error |
≤1dB% |
|
Transducer sensitivity |
≥100 mV/g (Acceleration Mode) |
|
Amplifier frequency range |
0.5∼9000 Hz |
|
Battery Operating Time |
>5 hours |
|
Power |
lithium battery |
|
Total weight |
Approx 0.34kg |
|
Fixed point magnification |
1, 2, 4, 8, 16, 32,64 |
|
Controller |
PDA with sunlight viewable touchscreen display |
|
Data Storage |
Yes |
Your Name 
Email or trade@chinacoalintl.com
Tel/Wechat/Whatsapp or +8615376502802
Country
Enquiry
