Dynamic Pile Testing Equipment,Dynamic Pile Testing Equipment Price,Dynamic Pile Testing Equipment Parameter,Dynamic Pile Testing Equipment Manufacturer-Shandong China Coal Group Instrument Branch

Introduction of Dynamic Pile Testing Equipment

By using the reflected wave method, the Dynamic Pile Testing Equipment is used to assess the integrality of concrete pile and identify the extent and location of the pile defect.

Application of Dynamic Pile Testing Equipment

Dynamic Pile Testing Equipment can be used for testing perfusion pile and hammer pile. It can also be used for testing the exposed top surface of constructions such as pillars.

Hammer instrument: use different types of hammer (different energy/material) for different types of piles (lengths, etc.)

Parameter of Dynamic Pile Testing Equipment

Item	Specifications	Item	Specifications
Control Mode	Embedded platform,Win CE Operation System	Monitor	8.4 inch,high brightness,TFT Color LCD
Data storage	2GB,SD card	Operation Mode	Touch screen
Trigger	Signal trigger	Ports	USB port
Noise voltage of the system	≤2 mV	Dynamic range	³184 dB
Amplifier frequency range	1Hz~10kHz	Input impedance	³1 MW
Sampling time intervals	6µs~64ms	Time resolution	6µs
Max length of sampling	³1024	Gain error	≤1 dB
Amplitude nonlinear degree	≤10%	Timing accuracy	≤1%
Floating point magnification (time)	1~256	Sentinel magnify (time)	1~1,000,adjustable
A/D resolution	16 bit A/D,8 bit floatingpoint	Max magnify (times)	256000
Number of channels	2	Transducer sensitivity	³100 mv/g(acceleration mode)
Consistency of phase position of two channels	±3° or 0.05ms	Frequency range of Transducer	0.5~9000 Hz(acceleration mode)
Amplitude consistency of two channels	≤3% or ≤±0.2dB	Continuous operating hours	>5 hrs
Interference between channels	≤1%	Power	AC:220V±10%,DC:+12V
Dimensions	256mm´188mm´63.5mm	Weight	2.3kg(lithium battery included)